Spray nozzle & spray system accessories

Listed below are various accessories complementing our range of nozzles and spray systems.

 

Tillbehör för vårt utbud av dysor och spraysystem, t ex Dur o Lock, swivel joints och SF Snap Release System.

Choose the right spray nozzle for an optimised spray process

Each type of spray nozzle has a specific flow rate, spray pattern and droplet size. To optimise the spray process, it is important to understand how different parameters affect the choice of spray nozzle and solution. 

RR Hansa Engineering AB
Robin Ryberg Spray nozzles & systems, Tank cleaning I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
LC Hansa Engineering AB
Linda Caporicci Column internals, Droplet separation, Spray nozzles & systems, Other products I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
HL Hansa Engineering AB
Hans Linder Spray nozzles & systems, Tank cleaning, Safety showers, Tank storage equipment I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
AB Hansa Engineering AB
Alexander Bergman Droplet separation, Column internals, Spray nozzles & systems, Tank cleaning I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • What is the function of the spray nozzle and the spray process?

    The first step when choosing the right spray nozzle is to define the function and application of the spray process, such as cooling a gas, washing a tank or flushing a conveyor belt. Type of spray nozzle, thus also spray pattern and droplet size, are important to consider in order to optimise the spray process.

    Read the full answer
  • Which droplet size is most suitable for the spray process?

    Droplet size is often critical in optimising a spray process. Many processes, such as gas cooling and gas scrubbing, depend on exposing the maximum total liquid surface area. The liquid then needs to be distributed in a large number of small droplets to create as much total surface area as possible. Other spray processes ...

    Read the full answer
  • What surface should the spray cover? How should the nozzle be positioned?

    The position of the nozzle over the target (D) and the area to be covered by the spray (B) are important to know in order to choose the right spray angle (A). The spray angle is measured near the nozzle orifice and the droplets are immediately affected by external forces such as gravity, air and gas flow.

    Read the full answer
  • Desired flow rate? Available pressure?

    Desired volume flow depends on the specific spray process. Most spray processes have general rules of thumb for flow ranges, but in many cases on-site testing is needed to achieve the right results.

    Read the full answer
  • What type of liquid is used in the spray process?

    A liquid's specific gravity, viscosity and the presence of particles affect the spray characteristics of the nozzle.

    Read the full answer
  • Are there external factors affecting the nozzle spray?

    Sometimes the spray is affected by external forces such as process gas flows, air flows or wind.

    Read the full answer
  • Which material is most suitable for the spray process?

    Listed below are a number of factors that should be considered when selecting materials for a specific nozzle. An incorrect choice of material is likely to affect the performance and life of the nozzle. We are happy to help and advise on which material is most suitable in your ...

    Read the full answer
  • What are the benefits of an optimised spray process?

    There are many factors to consider when selecting a nozzle for a specific spray process. An optimised spray process can make a big difference, contributing to: improved product and process quality increased production and reduced time for unplanned stops reduced maintenance costs lower operating costs by reducing the use of ...

    Read the full answer
PDF

Documents for download