Tankrengöringsmaskin BETE HydroWhirl Orbitor 100 för kraftfull och effektiv rengöring av större tankar

L3 - Mobile lance for near-source dust suppression

The L3 is a mobile lance suitable for suppressing dust close to the dust source. L3 is available in two versions, with a water flow of 4 l/min or 21 l/min and a throw length of up to 8-12 m or 20 m.

The L3 is very effective for small demolition work, at recycling plants or indoor work.

SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • Product information
  • Documentation & videos
  • Project planning
  • General info Dust control
  • Supplier information
  • Certifications
  • Save

    Email saved products to yourself, or send an RFQ to Hansa Engineering

Design features

  • Ideal for dust control over smaller areas close to the dust source
  • Two versions - flow rate 4 l/min or 21 l/min
  • Throw length up to 8-12 m or 20 m
L3 versions4 alt 21 l/min
Throw length8-12 alt 20 m
Power connection5 x 16 A
Nominal power - pump0.75 total 3 kW
Flow rate4 litres or 21 litres
Water pressure1-8 bar
Operating temperature0° to +35°
Tilt-30° to +60°
Rotation/swing - automatic270°
Noise level LA63 db(A), 20 m
ControlsRemote control
DimensionsSee Datasheet

Site visit, problem identification and planning

To make sure we deliver an optimal and sustainable solution we would like to make a site visit early on in the project, where we jointly look at the dust problem, specific requirements and investment objectives.

 

Site visit

A site visit early in the project is important to identify a variety of factors that might affect the selection and size of equipment, and any add-ons to achieve the most efficient and sustainable results. Regulatory requirements are also discussed at this stage.

Another important question is how the machine or system will be monitored and controlled, i.e. manually or automatically. Should it be a fixed installation or should it be possible to move the equipment around as needed?

Problem identification

During the site visit we discuss a number of different issues. Here are few examples:

  • What is the source of the dust? Is it a single point or over a large area?
  • What type and amount of dust does the dust source create?
  • Area near the dust source: Wind impact? Machinery, personnel and vehicles in motion? Possible safety hazards?
  • Is electricity and water available at the site?

Planning

Using the information gathered during the site visit, we prepare a summary and review it with the client to ensure that we agree on the scope of the project.

The next step is to start planning the project in order to propose a sustainable solution. At this stage we are in close contact with EmiControls' technical department, focusing on getting the most efficient system possible, with a low operating cost.

Choose the right product or solution for optimised dust control

Every dust problem is unique. The Knowledge base provides information on how dust control works and which questions are important to answer in order to achieve an effective, sustainable solution with low water and energy consumption.

Our main supplier is EmiControls, leading manufacturer of dust control equipment and solutions. With a strong focus on R&D, EmiControls has developed innovative technology and has extensive knowledge and experience in creating droplets optimised for effective dust control.

EmiControls develops all its products according to the following criteria:

  • Full control of water flow, throw length and drop size
  • Flexible configuration
  • Low energy consumption
  • Long life span of machinery and components
  • Low maintenance costs
  • User safety

Every customer has a unique dust problem. The core of EmiControls' business is to develop a customised solution for the customer to achieve the best results, and to offer a strong global after-sales service.

EmiControls was founded in 2011 and has its roots in TechnoAlpin, the world's leading manufacturer of snow guns. Since 2017, Hansa Engineering Group represents EmiControls in Sweden, Norway, Denmark and Finland. EmiControls also manufactures products and solutions for fire fighting and odour control.

EmiControls Certifications & Approvals

For a full list of our suppliers' various types of certifications, click here.