V12s Basic - Dust controller

V12s Basic is the quietest dust controller on the market, with a noise level of only 60-63 db(A) at a distance of 20 metres, making the V12s Basic very suitable for dust control in densely populated areas.

The difference between the V12s Basic and the V12s is that rotation/swing and tilt are set manually and not automatically. The turbine/fan can be set at two different speeds, allowing for flexible throw lengths in the range of 25 to 65 metres. The V12s Basic is compact and easy to transport or move around between different dust control areas on site.

Typical applications include demolition, recycling centres, material handling, loading/unloading, etc.

SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • Product information
  • Documentation & videos
  • Project planning
  • General info Dust control
  • Supplier information
  • Certifications
  • Save

    Email saved products to yourself, or send an RFQ to Hansa Engineering

Design features

  • The quietest dust controller on the market
  • Manual setting of rotation/swing and tilt
  • Throw length 25-65 m, depending on fan speed
  • Flow rate 110 l/min
  • Compact, easy to transport or move around on site
  • Mounted on an undercarriage or on a trailer
  • Very suitable for dust control in densely populated areas
Throw length25-35* / 50-65 m
Power connection5 x 32 A
Nominal power - turbine/fan3* or 11 kW
Nominal power - pump4 kW
Flow rate110 l/min
Water pressure2-5 bar
Operating temperature0° to +30°
Operating temperature - frost protected-10°C to +40°C
Tilt - manual0° to +50°
Rotation/swing - manual360°
Noise level LA60* or 63 db(A), 20 m
ControlsRemote control and display
Dimension & weightSee datasheet
* at lower fan speed

Site visit, problem identification and planning

To make sure we deliver an optimal and sustainable solution we would like to make a site visit early on in the project, where we jointly look at the dust problem, specific requirements and investment objectives.

Site visit

A site visit early in the project is important to identify a variety of factors that might affect the selection and size of equipment, and any add-ons to achieve the most efficient and sustainable results. Regulatory requirements are also discussed at this stage.

Another important question is how the machine or system will be monitored and controlled, i.e. manually or automatically. Should it be a fixed installation or should it be possible to move the equipment around as needed?

Problem identification

During the site visit we discuss a number of different issues. Here are few examples:

  • What is the source of the dust? Is it a single point or over a large area?
  • What type and amount of dust does the dust source create?
  • Area near the dust source: Wind impact? Machinery, personnel and vehicles in motion? Possible safety hazards?
  • Is electricity and water available at the site?


Using the information gathered during the site visit, we prepare a summary and review it with the client to ensure that we agree on the scope of the project.

The next step is to start planning the project in order to propose a sustainable solution. At this stage we are in close contact with EmiControls' technical department, focusing on getting the most efficient system possible, with a low operating cost.

Choose the right product or solution for optimised dust control

Every dust problem is unique. The Knowledge base provides information on how dust control works and which questions are important to answer in order to achieve an effective, sustainable solution with low water and energy consumption.

Our main supplier is EmiControls, leading manufacturer of dust control products and solutions. With a strong focus on R&D, EmiControls has developed innovative technology and has exstensive knowledge and experience on how to create droplets optimised for effective dust control.

EmiControls develops all its products according to the following criteria:

  • Full control of water flow, throw length and drop size
  • Flexible configuration
  • Low energy consumption
  • Long life span of machinery and components
  • Low maintenance costs
  • User safety

Every customer has a unique dust problem. The core of EmiControls' business is to develop a customised solution for the customer to achieve the best results, and to offer a strong global after-sales service.

EmiControls was founded in 2011 and has its roots in TechnoAlpin, the world's leading manufacturer of snow guns. Since 2017, Hansa Engineering Group represents EmiControls in Sweden, Norway, Denmark and Finland. EmiControls also manufactures products and solutions for fire fighting and odour control.

EmiControls Certifications & Approvals

For a full list of our suppliers' various types of certifications, click here.