Tankrengöringsmaskin BETE HydroWhirl Orbitor 100 för kraftfull och effektiv rengöring av större tankar

CW - Full cone spray nozzle

CW full cone spray nozzle creates medium to coarse atomisation. The CW nozzle is a three-piece construction with a spray tip, nozzle body, and an optional integrated filter in 50 or 100 mesh.

The spray tip can easily be interchanged, making it easy to adjust the flow rate if required.

HL Hansa Engineering AB
Hans Linder Spray nozzles & systems, Tank cleaning, Safety showers, Tank storage equipment
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
AB Hansa Engineering AB
Alexander Bergman Droplet separation, Column internals, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
RR Hansa Engineering AB
Robin Ryberg Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
LC Hansa Engineering AB
Linda Caporicci Column internals, Droplet separation, Spray nozzles & systems, Other products
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • Product information
  • Technical data
  • Documentation & videos
  • General info Spray nozzles & systems
  • Supplier information
  • Certifications
  • Save

    Email saved products to yourself, or send an RFQ to Hansa Engineering
CW är en spraydysa kommer som två varianter - fullkonsdysa eller hålkonsdysa. Dysan består av 3 delar – en spraytip, en dyskropp, samt ett integrerat filter som tillval i 50 eller 100 mesh. Dysan CW tillverkas av BETE Spray Technology.
Illustration av hur sprayen skapas i en axiell fullkonsdysa. Ingående och utgående sprayriktning är på samma axel.
CW är en spraydysa kommer som två varianter - fullkonsdysa eller hålkonsdysa. Dysan består av 3 delar – en spraytip, en dyskropp, samt ett integrerat filter som tillval i 50 eller 100 mesh. Dysan CW tillverkas av BETE Spray Technology. Illustration av hur sprayen skapas i en axiell fullkonsdysa. Ingående och utgående sprayriktning är på samma axel.

Design features

  • 3-piece construction
  • Interchangeable spray tips
  • Optional integrated filter, see Datasheet BETE Accessories
  • Medium to coarse atomisation
Spray patternFull cone - Axial
Spray angle80° - 120°
Flow rate0.355 - 8.07 l/min
Standard material - Body & Cap NutBrass, 303, 316
Connection1/8", 1/4", 3/8" BSP/NPT
Filter - Optional50 or 100 mesh
DimensionsSee Datasheet

Flow rates, spray angles & connections

If a specific pressure is not listed below or in the nozzle datasheet, it is possible to calculate the nozzle flow rate at a given pressure by using the equation at the bottom of the datasheet.

Flow rate (l/min) @ Differential pressure (bar), Density (1 SG)
Nozzle numberConnectionSpray angle0.7 bar1 bar3 bar7 bar15 bar
CW251/8", 1/4", 3/8"80°, 120°0,4950,5850,9801,46-
CW501/8", 1/4", 3/8"80°, 120°0,9891,171,962,92-
CW751/8", 1/4", 3/8"80°, 120°1,491,762,954,39-
CW1001/8", 1/4", 3/8"80°, 120°1,992,353,945,86-

Choose the right spray nozzle for an optimised spray process

Each type of nozzle has a specific flow rate, spray pattern and droplet size. To optimise the spray process, it is important to understand how different parameters affect the choice of spray nozzle and type of solution.

The Knowledge base contains information about spray pattern, droplet size, flow rate/pressure, spray coverage, materials, etc. The 'Materials' section of the Knowledge base lists the most commonly requested materials and maximum temperature of the material.

Our main supplier is BETE, a leading manufacturer of spray nozzles and spray systems with more than 70 years of experience in spray processes and a product range including over 20,000 components.

BETE's spray technology is used worldwide to optimise processes in many different industries, including the energy sector, chemical and petrochemical industry, food industry and offshore.

Some of BETE's certifications include ISO 9001:2015, ATEX and FM Approval.

BETE Performance Spray Engineering

BETE offers test facilities, CFD modelling, and advanced technical support. To ensure high quality and reliable deliveries, BETE's manufacturing is largely based 'in-house' with its own foundry, CNC machining, assembly and quality control.

BETE Certifications & Approvals

Click the button below for a full list of BETE's certifications. It is also possible to download some certificates.