Tankrengöringsmaskin BETE HydroWhirl Orbitor 100 för kraftfull och effektiv rengöring av större tankar

XAXW - Air atomising spray nozzle

XAXW is an air atomising nozzle with internal mixing producing very fine atomisation.

Not suitable for viscous liquids above 200 cP.

HL Hansa Engineering AB
Hans Linder Spray nozzles & systems, Tank cleaning, Safety showers, Tank storage equipment
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
AB Hansa Engineering AB
Alexander Bergman Droplet separation, Column internals, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
LC Hansa Engineering AB
Linda Caporicci Column internals, Droplet separation, Spray nozzles & systems, Other products
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
RR Hansa Engineering AB
Robin Ryberg Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • Product information
  • Technical data
  • Documentation & videos
  • General info Spray nozzles & systems
  • Supplier information
  • Certifications
  • Save

    Email saved products to yourself, or send an RFQ to Hansa Engineering
XAXW är en luftatomiserande dysa med intern mixning av vätska och luft. Dysan skapar en mycket fin atomisering av dropparna i sprayen. XAXW är inte lämplig för vätskor med en viskositet större än 200 cP.
Illustration av hur sprayen skapas av en luftatomiserande dysa med intern mixning. Vätska och luft blandas i dysan och lämnar dysan genom samma utloppshål. Förändring av luftflödet påverkar vätskeflödet. Denna typ av dysa är inte lämplig för vätskor med en viskositet över 200 cP.
XAXW är en luftatomiserande dysa med intern mixning av vätska och luft. Dysan skapar en mycket fin atomisering av dropparna i sprayen. XAXW är inte lämplig för vätskor med en viskositet större än 200 cP. Illustration av hur sprayen skapas av en luftatomiserande dysa med intern mixning. Vätska och luft blandas i dysan och lämnar dysan genom samma utloppshål. Förändring av luftflödet påverkar vätskeflödet. Denna typ av dysa är inte lämplig för vätskor med en viskositet över 200 cP.

Design features

  • Very fine atomisation
  • Not suitable for viscous liquids above 200 cP
  • Internal mixing
  • The streams are not independent; airflow changes will affect the liquid flow
Spray patternInternal mixing - hollow cone
Spray angle180°
Flow rate4.2 - 48 l/hr (liquid), See Datasheet
Standard material - Body & Cap NutNickel-plated Brass, 303, 316303
Connection1/8", 1/4", 1/2" BSP/NPT
DimensionsSee Datasheet

Flow rates, spray angles & connections

If a specific pressure is not listed below or in the nozzle datasheet, it is possible to calculate the nozzle flow rate at a given pressure by using the equation at the bottom of the datasheet.

Nozzle numberConnectionSpray angleFlow rate
XAXW 0501/8", 1/4"180°See Datasheet
XAXW 50501/2"180°Contact Hansa

Choose the right spray nozzle for an optimised spray process

Each type of nozzle has a specific flow rate, spray pattern and droplet size. To optimise the spray process, it is important to understand how different parameters affect the choice of spray nozzle and type of solution.

The Knowledge base contains information about spray pattern, droplet size, flow rate/pressure, spray coverage, materials, etc. The 'Materials' section of the Knowledge base lists the most commonly requested materials and maximum temperature of the material.

Our main supplier is BETE, a leading manufacturer of spray nozzles and spray systems with more than 70 years of experience in spray processes and a product range including over 20,000 components.

BETE's spray technology is used worldwide to optimise processes in many different industries, including the energy sector, chemical and petrochemical industry, food industry and offshore.

Some of BETE's certifications include ISO 9001:2015, ATEX and FM Approval.

BETE Performance Spray Engineering

BETE offers test facilities, CFD modelling, and advanced technical support. To ensure high quality and reliable deliveries, BETE's manufacturing is largely based 'in-house' with its own foundry, CNC machining, assembly and quality control.

BETE Certifications & Approvals

Click the button below for a full list of BETE's certifications. It is also possible to download some certificates.