PJ - Misting spray nozzle

PJ misting nozzle atomises the liquid into a fine mist of fog, when the laminar jet impinges on the target pin.

The P and PJ misting nozzles create the finest fog of any direct pressure nozzles. For increased safety at high working pressures, the PJ nozzle can be supplied with a hole for attaching a safety cable.

HL Hansa Engineering AB
Hans Linder Spray nozzles & systems, Tank cleaning, Safety showers, Tank storage equipment
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
RR Hansa Engineering AB
Robin Ryberg Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
SM Hansa Engineering AB
Sol Millerv Dust control, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
LC Hansa Engineering AB
Linda Caporicci Column internals, Droplet separation, Spray nozzles & systems, Other products
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
AB Hansa Engineering AB
Alexander Bergman Droplet separation, Column internals, Spray nozzles & systems, Tank cleaning
I look forward to providing product advice and solutions! Let's meet via a video call or a site visit. You can also phone or email us, of course.
  • Product information
  • Technical data
  • Documentation & videos
  • General info Spray nozzles & systems
  • Supplier information
  • Certifications
  • Save

    Email saved products to yourself, or send an RFQ to Hansa Engineering
PJ misting nozzle atomises the liquid into a fine mist of fog, when the laminar jet impinges on the target pin.
Illustration av hur sprayen skapas av en impingement dimdysa. Atomiserar, dvs finfördelar, vätskan när den laminära strålen träffar stiftet vid utloppshålet och på så sätt skapar en fin dimma. Sprayvinkel 70° – 90°.
PJ misting nozzle atomises the liquid into a fine mist of fog, when the laminar jet impinges on the target pin. Illustration av hur sprayen skapas av en impingement dimdysa. Atomiserar, dvs finfördelar, vätskan när den laminära strålen träffar stiftet vid utloppshålet och på så sätt skapar en fin dimma. Sprayvinkel 70° – 90°.

Design features

  • High energy efficiency
  • Compact design
  • A laminar jet impinges on target pin generating fine fog
  • To achieve a 90° spray angle, the pressure should be at least 4 bar
Spray patternFine mist or fog
Spray angle90°
Flow rate0.0254 - 9.19 l/min
Standard material - Body & Cap NutBrass, 303, 316
Connection1/8", 1/4" BSP/NPT
Filter - standard100 mesh 316SS
Filters - optional200 mesh 316SS
20 micron paper
70 micron polypropylene
DimensionsSee Datasheet

Flow rates, spray angles & connections

If a specific pressure is not listed below or in the nozzle datasheet, it is possible to calculate the nozzle flow rate at a given pressure by using the equation at the bottom of the datasheet.

Flow rate (l/min) @ Differential pressure (bar), Density (1 SG)
Nozzle numberConnectionSpray angle0.7 bar3 bar7 bar70 bar150 bar200 bar
PJ61/8", 1/4"90°--0,03620,1150,1680,194
PJ81/8", 1/4"90°--0,06850,2170,3170,366
PJ101/8", 1/4"90°-0,06720,1030,3250,4750,549
PJ121/8", 1/4"90°-0,09090,1390,4390,6430,742
PJ151/8", 1/4"90°-0,1460,2230,7051,031,19
PJ201/8", 1/4"90°0,1280,2650,4051,281,872,16
PJ241/8", 1/4"90°0,1910,3950,6031,912,793,22
PJ281/8", 1/4"90°0,2480,5140,7862,483,644,20
PJ321/8", 1/4"90°0,3440,7121,093,445,035,81
PJ401/8", 1/4"90°0,5351,111,695,357,839,04

Choose the right spray nozzle for an optimised spray process

Each type of nozzle has a specific flow rate, spray pattern and droplet size. To optimise the spray process, it is important to understand how different parameters affect the choice of spray nozzle and type of solution.

The Knowledge base contains information about spray pattern, droplet size, flow rate/pressure, spray coverage, materials, etc. The 'Materials' section of the Knowledge base lists the most commonly requested materials and maximum temperature of the material.

Our main supplier is BETE, a leading manufacturer of spray nozzles and spray systems with more than 70 years of experience in spray processes and a product range including over 20,000 components.

BETE's spray technology is used worldwide to optimise processes in many different industries, including the energy sector, chemical and petrochemical industry, food industry and offshore.

Some of BETE's certifications include ISO 9001:2015, ATEX and FM Approval.

BETE Performance Spray Engineering

BETE offers testing facilities, CFD modelling, and advanced technical support. To ensure quality and delivery reliability, BETE's manufacturing is largely 'in-house' with its own foundry, CNC machining, assembly and quality control.

BETE Certifications & Approvals

Click the button below for a full list of BETE's certifications. It is also possible to download some certificates.